get a grip

We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle.


Water Shedding Fins

Beefing up the outer zone of the grip with a heartier design not only helps absorb more vibration it also wicks water off on rainy day rides.


Happy Camper Compound

A blend that’s soft enough to absorb vibration, yet firm enough to keep its shape under pressure. Striking a balance between ultra soft materials that wear too quickly and a harder compound with no tactile benefits.

3 Year Warranty

We've always got
your back

Fast Shipping Options

Get your parts for the
weekend ride

Unparalleled Service

Seriously, we're here
for you

Pacific NW Approved

All Season reliability, tested in the mountains

Pattern Play

The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this area.

How Does Travel Adjust work?

Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:

  1. Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
  2. Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
  3. You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
  4. Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
  5. After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.

How Does Travel Adjust work?

Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:

  1. Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
  2. Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
  3. You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
  4. Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
  5. After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.

Specs: LOAM GRIP

diameter

Average 30mm

WIDTH

133.5mm

DUROMETER

25A

Weight

Pair
90g

clamp style

Closed Sale, single Clamp

Manuals

grips

loam

FAQ

Is there a specific left/right?

Yep! When installed you will want the clamp bolts toward the rear of the bike for ease of access, when adjusting.

Do these grips lock on the bars?

They do! They have a single lock ring that clamps the grips to your bars.

What size handlebars do these fit?

Our Loam grips fit almost all mountain bike/flat handlebars with the standard grip end of 22.2mm. This includes those with a 31.8mm or 35mm center clamp size.

How sticky are these?!

They're "sticky" in the sense that they provide great traction, even when wet, but will not leave residue on your hands.

Warranty

PNW 3-Year Warranty

Do we have your back? Of course. If anything goes wrong, we're here to do everything we can to ensure you're taken care of.

Reviews

These are the best grips I have ever owned.

Brent B. Verified Customer

The Loam grips are a class act in the realm of comfort.

Simon Silver Mountain Bike Magazine

I love the feel. They are very comfortable. My hands do not get tired or numb!

Erik K. Verified Customer

Gallery