COAST iNTERNAL ROUTiNG
Find your specific lever and dropper combo below and click to download your manual or scroll down to watch a digital installation guide.
DOWNLOADS
manual
coast internal +
puget 1X lever
Download
manual
coast internal W/ Other LEVER
Download
ViDEOS
coast internally routed + loam LEVER INSTALL
coast internally routed + 1X PUGET LEVER INSTALL
coast internally routed + 2x puget lever install
FAQ
How often do I need to service my post?
Is your post sticky, slowing down, or generally less peppy than it used to be? Then, it's likely time for a little TLC and to give it a service. Check out our service video by scrolling to the end of this page. If it's not sticky or slowing down, just go ride!
How do I adjust the return speed?
Snug up that cable tension. Make sure your housing and internal cables are lubed and not kinked or frayed!
Post sagging or dropping without actuating the lever?
Check this setting first: If your cable tension is too tight, it can activate the post without you touching the lever. Try backing off of the cable tension a bit. If that doesn't do it, test the post without the cable attached to rule out a tension issue.
Coast Recommended PSI (lbs)
Rider Weight | |
110 -165 lbs: | 200 - 230 psi |
165 -240 lbs: | 230 - 260 psi |
240 - 275 lbs: | 260 - 300 psi |