RAiNiER GEN 3
Find your specific lever and dropper combo below and click to download your manual or scroll down to watch a digital installation guide.
DOWNLOADS
MANUAL
rAINIER GEN 3 + LOAM LEVER
manual
rainier gen 3 +
puget 1X lever
MANUAL
rAINIER GEN 3 +
PUGET 2X LEVER
manual
rainier gen 3 +
DROP BAR LEVER
manual
RAINIER GEN 3 W/ NO LEVER
This manual is for customers who purchased the Rainier without a PNW Lever, if you did purchase your post with a lever find the appropriate manual above... we promise it will make things easier!
Download
ViDEOS
RAINIER GEN 3 + loam LEVER INSTALL
RAINIER GEN 3 + 1X PUGET LEVER INSTALL
rainier gen 3 + 2x puget lever
How to Use the RAINIER GEN 3'S Tool-less Travel Adjust
PRO TIPS FOR DROPPER POST CARE
Appropriate Torque
Always check your frame manufacturers recommendation for seat collar torque, but we recommend a 4-5Nm torque as a general guideline
Keep it Clean!
Wipe the stanchion clean after each ride to help minimize wear. If you notice the post slowing down unthread the mid cap, slide it up, apply stanchion oil, sram butter or slick honey to the stanchion/upper bushing and re-tighten the mid cap by hand.
FAQ
How often do I need to service my post?
Is your post sticky, slowing down, or generally less peppy than it used to be? Then, it's likely time for a little TLC and to give it a service. Check out the service video below for details. If it's not sticky or slowing down, just go ride!
How do I adjust the return speed?
Snug up that cable tension. Make sure your housing and internal cables are lubed and not kinked or frayed!
Post sagging or dropping without actuating the lever? Check this setting first:
If your cable tension is too tight, it can activate the post without you touching the lever. Try backing off of the cable tension a bit. If that doesn't do it, test the post without the cable attached to rule out a tension issue.