The Bar That's still got your back  

Our Range Handlebar Gen 3 remains focused on ergonomics and comfort, with a width of 800mm and a new 35mm diameter option. With the industry continually trending towards frames with longer reach, our Range Handlebar Gen 3 prioritizes minimizing back discomfort and wrist fatigue so you never feel like you have ol' bird bones on your climbs or descents.


personal preference

We appreciate our local watering hole having multiple beers on tap, and figured the same goes for bar diameter. Our Gen 3 gives the option of 31.8mm (our OG size for the purist) or 35mm. Through material choice and smart butting profiles, we created a 35mm bar that's a dream to pilot.


material matters

The Range features 2014 Aluminum Alloy, a trail friendly material resembling carbon’s chatter absorbing qualities in a more cost conscious and durable package.

Lifetime Warranty

We've always got
your back

Fast Shipping Options

Get your parts for the
weekend ride

Unparalleled Service

Seriously, we're here
for you

Pacific NW Approved

All Season reliability, tested in the mountains

SPEAKING OF GEOMETRY...

Wrist & Back Savers...

We kept the best parts of our Range Handlebar and baked ‘em into this new one. The tall rise and relaxed upsweep + back sweep are the essential ingredients to making all of your future singletrack sessions purely zen. The Gen 3 bars still feature a 10 degree back sweep and 5 degree upsweep, putting your arms and shoulders in a more relaxed position. And a 30mm rise in the bar means you won’t be hunched over like that creepy scoliosis test they used to give in gym class.

Lost Weight, but Got bigger?

But how? Science? Physics? Geometry? Engineers are crafty. By widening the width of the bar from 780 to 800, we’re able to extend those butting profiles and remove unnecessary material, reducing the weight of the previous Range Handlebar by as much as 25 grams.

How Does Travel Adjust work?

Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:

  1. Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
  2. Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
  3. You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
  4. Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
  5. After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.

How Does Travel Adjust work?

Our travel adjust system allows for a total of 30mm travel reduction in 5mm increments. If you were riding that line between travel sizes you can now fine-tune the perfect fit by following the easy directions below:

  1. Begin by lowering your dropper at or below the desired travel length (just make sure it’s not fully extended!)
  2. Unthread the midcap with your hand and slide it up to reveal the white DU Bushing.
  3. You’ll see negative numbers with corresponding notches machined into the post (each # represents decreasing travel.
  4. Slide the DU bushing up and rotate it to align the black arrow with the amount of travel you would like to reduce, then seat the arrow into the machined groove. (Make sure it’s fit securely into these notches!)
  5. After pushing the DU Bushing back down, lower the midcap and hand tighten (no need to go overboard!) and ride off into the sunset with the perfect travel for you.

Specs: RANGE HANDLEBAR Gen 3

width

800mm

clamp diameter

31.8mm and 35mm

rise

30mm

weight

31.8mm - 314g, 35mm - 310g

Material

2014-T73 heat treated alloy

Manuals

handlebars

Range Handlebar Gen 3

FAQ

Can I cut these down to make them narrower?

Yep! You can trim the Range bar down if you prefer a narrower bar width, we have a guide on the bars for measurement ease.

Which levers are compatible with these bars?

For flat/mountain bike bars we recommend our Loam Lever, Puget 1x, or Puget 2x lever.

Which stem diameter is compatible with these bars?

Our Range bars are compatible with 31.8mm or 35mm diameter clamp stems depending on what size bar you choose, and will fit perfectly with our Range Stem in either the 31.8 or 35mm diameter.

Warranty

PNW Lifetime Warranty

Do we have your back? Of course. If anything goes wrong, we're here to do everything we can to ensure you're taken care of.

Reviews

I have improved positioning on the bike, more comfortable rides and no lower back pain or discomfort in my hands.

Alfredo V. Verified Customer

Love these bars. Really reduced the trail chatter while still giving me good feedback.

Thomas S. Verified Customer

I love the back sweep and rise. Such a comfortable bar that takes a beating.

Jacob A. Verified Customer

Gallery